1N4001-D

1N4004 and 1N4007 are Preferred Devices

Axial Lead StandardRecovery Rectifiers

This data sheet provides information on subminiature size, axiallead mounted rectifiers for general−purpose low−power applications.

Features

http://onsemi.com

•Shipped in plastic bags, 1000 per bag

•Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to••

the part number

Available in Fan−Fold Packaging, 3000 per box, by adding a “FF”suffix to the part number

Pb−Free Packages are Available

LEAD MOUNTED RECTIFIERS

50−1000 VOLTSDIFFUSED JUNCTION

Mechanical Characteristics

•Case: Epoxy, Molded

•Weight: 0.4 gram (approximately)

•Finish: All External Surfaces Corrosion Resistant and Terminal••

Leads are Readily Solderable

Lead and Mounting Surface Temperature for Soldering Purposes:260°C Max. for 10 Seconds, 1/16 in. from casePolarity: Cathode Indicated by Polarity Band

CASE 59−10AXIAL LEADPLASTICMARKING DIAGRAMA1N400xYYWWGGA= Assembly Location1N400x= Device Numberx= 1, 2, 3, 4, 5, 6 or 7YY= YearWW= Work WeekG= Pb−Free Package(Note: Microdot may be in either location)ORDERING INFORMATIONSee detailed ordering and shipping information on page 4 ofthis data sheet.Preferred devices are recommended choices for future useand best overall value.

*For additional information on our Pb−Free strategy and soldering details, pleasedownload the ON Semiconductor Soldering and Mounting TechniquesReference Manual, SOLDERRM/D.

© Semiconductor Components Industries, LLC, 20051

August, 2005 − Rev. 12

Publication Order Number:

1N4001/D

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

MAXIMUM RATINGS

Rating

†Peak Repetitive Reverse VoltageWorking Peak Reverse VoltageDC Blocking Voltage

†Non−Repetitive Peak Reverse Voltage(halfwave, single phase, 60 Hz)†RMS Reverse Voltage

†Average Rectified Forward Current(single phase, resistive load,60 Hz, TA = 75°C)

†Non−Repetitive Peak Surge Current(surge applied at rated load conditions)Operating and Storage JunctionTemperature Range

SymbolVRRMVRWMVRVRSMVR(RMS)

IO

1N400150

1N4002100

1N4003200

1N4004400

1N4005600

1N4006800

1N40071000

UnitV

6035

12070

240140

4802801.0

720420

1000560

1200700

VVA

IFSMTJTstg

30 (for 1 cycle)−65 to +175

A°C

Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limitvalues (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,damage may occur and reliability may be affected.

ELECTRICAL CHARACTERISTICS†

Rating

Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C)

Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads)Maximum Reverse Current (rated DC voltage)(TJ = 25°C)(TJ = 100°C)

Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads)†Indicates JEDEC Registered Data

SymbolvFVF(AV)IR

0.051.0

IR(AV)

−

105030

mA

Typ0.93−

Max1.10.8

UnitVVmA

http://onsemi.com

2

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

10IF, FORWARD CURRENT (A)1.0E−04IR, REVERSE CURRENT (A)1.0E−05TC = 150°C1.0E−061

TC = 100°CTC = 100°C1.0E−071.0E−08TC = 25°C1002003004005006007008009001000TC = 150°CTC = 25°C0.10.50.60.70.80.911.11.21.0E−090VF, INSTANTANEOUS FORWARD VOLTAGE (V)VR, REVERSE VOLTAGE (V)Figure 1. Typical Forward VoltageFigure 2. Typical Reverse Current100TJ = 25°CC, CAPACITANCE (pF)101020406080100120140160180200VR, REVERSE VOLTAGE (V)

Figure 3. Typical Capacitance

http://onsemi.com

3

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

ORDERING INFORMATION

Device

1N40011N4001G1N4001FF1N4001FFG1N4001RL1N4001RLG1N40021N4002G1N4002FF1N4002FFG1N4002RL1N4002RLG1N40031N4003G1N4003FF1N4003FFG1N4003RL1N4003RLG1N40041N4004G1N4004FF1N4004FFG1N4004RL1N4004RLG1N40051N4005G1N4005FF1N4005FFG1N4005RL1N4005RLG

PackageAxial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)

Shipping†1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel PackagingSpecifications Brochure, BRD8011/D.*This package is inherently Pb−Free.

http://onsemi.com

4

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

ORDERING INFORMATION

Device

1N40061N4006G1N4006FF1N4006FFG1N4006RL1N4006RLG1N40071N4007G1N4007FF1N4007FFG1N4007RL1N4007RLG

PackageAxial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)Axial Lead*Axial Lead*(Pb−Free)

Shipping†1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel1000 Units/Bag1000 Units/Bag3000 Units/Box3000 Units/Box5000/Tape & Reel5000/Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel PackagingSpecifications Brochure, BRD8011/D.*This package is inherently Pb−Free.

http://onsemi.com

5

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

PACKAGE DIMENSIONS

AXIAL LEADCASE 59−10ISSUE U

BNOTES:

1.DIMENSIONING AND TOLERANCING PER ANSIY14.5M, 1982.

2.CONTROLLING DIMENSION: INCH.

3.ALL RULES AND NOTES ASSOCIATED WITHJEDEC DO−41 OUTLINE SHALL APPLY4.POLARITY DENOTED BY CATHODE BAND.

5.LEAD DIAMETER NOT CONTROLLED WITHIN FDIMENSION.

KFDAPOLARITY INDICATOROPTIONAL AS NEEDED(SEE STYLES)FKDIMABDFK

INCHESMINMAX0.1610.2050.0790.1060.0280.034−−−0.0501.000−−−MILLIMETERS

MINMAX4.105.202.002.700.710.86−−−1.2725.40−−−

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liabilityarising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. Alloperating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rightsnor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicationsintended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. ShouldBuyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or deathassociated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an EqualOpportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:Literature Distribution Center for ON SemiconductorP.O. Box 61312, Phoenix, Arizona 85082−1312 USAPhone: 480−829−7710 or 800−344−3860 Toll Free USA/CanadaFax: 480−829−7709 or 800−344−3867 Toll Free USA/CanadaEmail: orderlit@onsemi.comN. American Technical Support: 800−282−9855 Toll FreeUSA/CanadaJapan: ON Semiconductor, Japan Customer Focus Center2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051Phone: 81−3−5773−3850ON Semiconductor Website: http://onsemi.comOrder Literature: http://www.onsemi.com/litorderFor additional information, please contact yourlocal Sales Representative.http://onsemi.com61N4001/D