MN101C47资料

MN101C47C, MN101C47DTypeROM (×8-bit)RAM (×8-bit)Package(Conventional Package)Minimum InstructionExecution TimeInterruptsTimer CounterSerial InterfaceCaptionI/O PinsA/D InputsPWMSpecial PortsCRTCNotesI/OMN101C47C48 K1.5 KMN101C47D64 K2 K SDIP042-P-0600C *Lead-free, LQFP064-P-1414 *Lead-free(SDIP042-P-0600)279 ns (at 3.0 V to 3.6 V, 14.32 MHz)External (6 lines)Internal (8 lines) : Timer × 3, A/D, OSD, I2C, Remote control, Watchdog8-bit timer × 3Watchdog timer: system clock fs 1/216, 1/218, 1/220 triple selectionI2C × 1: for multimaster mode, bus line (output) has 2 systems• Built-in sync separator × 235• Common use: 295-bit × 8-ch. (with S/H)8-bit × 6-ch. , 14-bit × 1-ch.Remote control reception1-layer display (graphics, characters)Remote control input discriminant circuit built-inSupport Tool

In-circuit EmulatorEPROM Built-in TypePX-ICE101C/D+PX-PRB101C47-SDIP046-P-0600-M (under development)TypeROM (× 8-bit)RAM (× 8-bit)Minimum instruction execution timePackage(Conventional Package)MN101CF46F (under development)96 K3 K279 ns (at 3.0 V to 3.6 V, 14.32 MHz)SDIP042-P-0600C *Lead-free, LQFP064-P-1414 *Lead-free(SDIP042-P-0600)1

MAD00027CEM

元器件交易网www.cecb2b.com

MN101C47C, MN101C47D

Pin AssignmentMAD00027CEM

IRQ0,RMIN,P00142VSS*1 SDA1,P01241OSC2*1 SCL1,P02340OSC1IRQ1,ADIN0,P03439VDD(VPP) *2ADIN1,P04538P42,SCL0 *1ADIN2,P05637P41,SDA0 *1ADIN3,P06736P40,PWMADIN4,P07835P37,NVSYNC,IRQ5ADIN5,P10934P36,NRSTADIN6,P111033P35,YMADIN7,P1211MN101C47CMN101C47D32P34,ROUT*3 MMOD1231P33,GOUTSYSCLK,P131330P32,BOUT*1 PWM0,P141429P31,YSPWM1,P151528VSSPWM2,P161627P30,NHSYNCIRQ2,PWM3,P171726P27IRQ3,PWM4,P201825P26*1 IRQ4,PWM5,P211924P25VDD2023P24P222122P23SDIP042-P-0600C *Lead-free

(SDIP042-P-0600)

*1: 5 V dielectric Nch open drain output pin

*2: Mask ROM = VDD, Flash memory built-in type = VPP*3: MMOD = H (fixed) (Set the test mode pin to the normal mode.)

5QRI,CNTTTUUUTYSSMSOOOMRVBR...YGYNNW,,,,,,.,.P,..CCSC123456C7C0CC..S.NNVN333333...PPPPPPN3PN4.PNN87654321098765434444444443333333P30,NHSYNC4932P41,SDA0 *1N.C.5031N.C.N.C.5130P42, SCL0 *1P275229N.C.P265328VDD(VPP)P255427OSC1P245526OSC2P2356MN101C47C25VSSP2257MN101C47D

24IRQ0,RMIN,P00N.C.5823SDA1,P01 *1VDD5922SCL1,P02 *1*1 P21,PWM5,IRQ46021IRQ1,ADIN0,P03P20,PWM4,IRQ36120ADIN1,P04P17,PWM3,IRQ26219N.C.N.C.6318N.C.P16,PWM26417ADIN2,P0501234561234567891111111..CC5.43.10.6..1C11CD2111C700CC..NNP..,1NPPP.PP..,,,,,0NOMPP,,765N43NNMMKLMNNNNNWWC IIIII2DDDPPS*DD AAAAA1Y*SLQFP064-P-1414 *Lead-free

*1: 5 V dielectric Nch open drain output pin*2: MMOD = H (fixed)

( ) : Conventional Package2

元器件交易网www.cecb2b.com

Request for your special attention and precautions in using the technical information

and semiconductors described in this material

(1)An export permit needs to be obtained from the competent authorities of the Japanese Government

if any of the products or technologies described in this material and controlled under the \"ForeignExchange and Foreign Trade Law\" is to be exported or taken out of Japan.(2)The technical information described in this material is limited to showing representative characteris-tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-tual property right or any other rights owned by our company or a third party, nor grants any license.(3)We are not liable for the infringement of rights owned by a third party arising out of the use of the

product or technologies as described in this material.(4)The products described in this material are intended to be used for standard applications or general

electronic equipment (such as office equipment, communications equipment, measuring instru-ments and household appliances).

Consult our sales staff in advance for information on the following applications:

•Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,combustion equipment, life support systems and safety devices) in which exceptional quality andreliability are required, or if the failure or malfunction of the products may directly jeopardize life orharm the human body.

•Any applications other than the standard applications intended.(5)The products and product specifications described in this material are subject to change without

notice for modification and/or improvement. At the final stage of your design, purchasing, or use ofthe products, therefore, ask for the most up-to-date Product Standards in advance to make sure thatthe latest specifications satisfy your requirements.(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-wise, we will not be liable for any defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration ofincidence of break down and failure mode, possible to occur to semiconductor products. Measureson the systems such as redundant design, arresting the spread of fire or preventing glitch arerecommended in order to prevent physical injury, fire, social damages, for example, by using theproducts.(7) When using products for which damp-proof packing is required, observe the conditions (including

shelf life and amount of time let standing of unsealed items) agreed upon when specification sheetsare individually exchanged.(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written

permission of Matsushita Electric Industrial Co., Ltd.

2002 JUL